SANY HZS120F8 Concrete Batching Plant 2020 Model 120 m3/h

SANY HZS120F8 Concrete Batching Plant (2020 Model)

This is a stationary, inclined-belt-type engineering concrete batching plant, designated as model HZS120F8 and equipped with the JS2000E twin-shaft forced-action mixer—the standard primary mixing unit for this series. The plant has a nominal production capacity of 120 m³/h. The JS2000E mixer features a single-batch discharge volume of 2 m³ and a cycle time of 60 seconds per batch. Its drive system comprises two 37 kW motors (total 74 kW). The maximum permissible aggregate particle size is 80 mm. The main mixing unit weighs 8,300 kg, consistent with the data indicated on the official equipment nameplate.

Material Storage and Weighing System

• Aggregate storage: Four independent bins, each with a capacity of 17 m³, enabling simultaneous feeding of four types of aggregates (e.g., sand and crushed stone). Aggregate weighing employs cumulative measurement with an accuracy of ±2%.
• Powder storage: Configurable with four 200-ton silos for cement and fly ash; alternatively, a three-silo configuration may be selected based on project requirements. Cement weighing range: 200–1,200 kg; fly ash weighing range: 100–800 kg; both with weighing accuracy of ±1%. Water weighing range: 50–400 kg; admixture weighing range: 5–30 kg; both with ±1% accuracy.

Overall Technical Specifications

• Discharge height: 3.8 m—compatible with standard 12-m³ concrete mixer trucks.
• Total installed power: Approximately 210 kW.
• Approximate net weight (excluding powder silos): 83 metric tons.
• Feeding method: Inclined belt conveyor.
• Control system: SANY SYMC fully automated computerized control system, supporting batch formula storage, real-time monitoring, and production report generation.
• Environmental compliance: Equipped with a pulse-jet baghouse dust collector meeting applicable environmental protection standards.
• Structural design: F8 modular architecture, facilitating transport, installation, and maintenance.

Notes

1. The HZS120F8 is classified as an engineering batching plant—not a commercial ready-mix concrete plant—and is intended for on-site or project-specific applications.
2. Actual output typically ranges between 90–110 m³/h under normal operating conditions; this variation reflects influences such as aggregate moisture content, mix design complexity, and equipment maintenance status.
3. Powder silos are optional components; final configuration shall be determined in accordance with site-specific requirements and physical constraints.